Be the first to review “DG3 Internal Frame and Lumber Pad” Cancel reply
DG3 Internal Frame and Back Pad
$35.00
Shipping Info & Rates
Orders over $100 qualify for free shipping to anywhere within Australia.The packaged weight of this item is kgs.
Shipping is calculated based on your order’s total package weight at checkout. The packaged weight of this item is listed above. The unpackaged item may weigh significantly less. Please see below for current shipping rates for listed destinations.
Orders over $100 qualify for free shipping anywhere within Australia.
Australia:
0kgs – .5kgs: $8.95
0.5kgs – 1kg: $12.20
1kg – 3kgs: $15.35
3kg – 5kgs: $18.50
5kgs – 10kgs: $32
International
0kgs – 3kgs: $80
3kgs – 5kgs: $110
For orders to North America, Please use our North American website.
Shipping Times:
If you need your order to arrive by Christmas action your purchase no later than the 13th December at a minimum. We’ll do our very best to ensure your order reaches you prior to Christmas if you order before this date, however, we cannot guarantee with certainty. Please keep this in mind and leave more time if possible.
Normally, the expected business days to receive your purchase are:
Australia Metro: 3-5 days.
Australia Regional: 3-8 days.
International: 5-15 days (however also depends on your country’s customs and internal postal service).
For more information or any questions regarding shipping please contact us. For large orders, we encourage you to enquire with us for a discount.
This internal frameset is to be used when smaller external dimensions are required. Easily detach the standard DG3 18″ external frame from the DG3 bag in minutes and slide in the internal frame sheet to quickly be able to have a lower footprint. This framesheet was designed to fill a specific requirement to fit inside an AFV, PMV or inside your car where cubic centimetres are a precious commodity.
Related products
-
HWI KTS300 – Hard Knuckle Touch Screen Gloves (Coyote)
Rugged, tactical, hard knuckle glove with touchscreen capable technology.Part of the HWI Gear Touch Extreme series, the KTS series utilizes HWI's Touch Tool™design. This allows features such as you don’t have to take your gloves off to operate touchscreen devices in the field. With a rugged hard knuckle design and touchscreen capable fingertips this glove is always on and you are always protected.
$81.00Select options -
DG1 ‘Spitfire’ Assault Pack – for short-range high-speed ops
The DG-1 "Spitfire" is light, fast and agile! Just like its ancestor from WW2, it fits a very unique role of short-range high-speed operations. It comes complete with a main enclosed compartment that can hang a hydration bladder with enough room to add a smock or even a second bladder. The second main pouch is buckle opening (with compression straps), this is a massive compartment when opened. It can house a helmet with an attached headset and NVG's with room to spare. The small rear pouch (approximately 3Ls) is a round zip opening and can house essentials for the operation. There are two additional zip admin pouches for keys and electronics, extra batteries along with two smaller side zip pouches to house the extra essentials. This pack can be worn with shoulder straps and waist belt, or stowed and woven onto the a plate carrier or a ruck with its built in PALS webbing.
$267.00 – $277.00Select options -
DG Top Load 5 Litre GP Pouch
Designed to carry those things that normally live on the outside of your pack, including a 24 hour CRP or SADF Water 2 litre Water bottle.The GD top load 5 ltr is made from strong and hardwearing denier Cordura nylonVertical mounted utility pouch Requires two rows of MOLLE 1 large pocket Internal mesh pocket on lid Fits MOLLE compatible systems Dimensions: 18cm Wide x 27cm High x 8cm Deep Colour: Multicam, Khaki,
$53.00 – $60.00Select options -
LOKSAK SHIELDSAK “Laptop”
$378.00Read more
Reviews
There are no reviews yet.